The 1010LD Leak Detection and Pipeline Management systems is a complete Software and Hardware solution that assures Controlotron can take full responsibility for all aspects of operation and performance, as compared to hybrid systems. Optimized trend performance to better than 0.25 % in one Minute. Separate 1010LL Leak Location system triangulates leak location to within 10 meters in most applications. Leak Detection System Features - Windows based Master Station polls all site simultaneously every minute.
- Site Stations communicate via RS232 using phone lines, radio, satellite, fibre-optics, hardwire or SCADA communications networks
- Alarm, Graphic & Numerical Data screens at Master Station display process information.
- Leak Detection assessed using Compensated Balance method which computes and corrects for liquid expansion due to thermal or pressure changes.
General Features - Available in both fixed and portable versions.
- Non-Intrusive Clamp-On sensors allowing installation without stopping flow or cutting pipework.
- Very high accuracy.
- Very high reliability.
- Calibration of zero and span without stopping flow
Wide Beam Transducers - Ensure accurate flow measurement regardless of the liquid type or temperature.
- Enable operation with up to 50% Aeration, and indicate its presence.
- Are resistant to Aberrated Flow Profile and Crossflow errors.
- Provide continuous Automatic Zero Adjustment to prevent Zero Drift.
- Are fully maintainable without need to open pipeline or stop flow.
- Sonic identification of Product Type and Quality.
- Provide all conventional digital and analog data outputs.
|
.JPG'))
.JPG'))
