sales@zedflo.com.au
(08) 9302 1266
Product has been added to your cart.
RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency)
RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency) - Image 2
RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency) - Image 3
RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency) - Image 4
RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency) - Image 5
RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency) - Image 6

3 Years Warranty via Registration covered by Radiodetection Australia.

RD8200SG Survey Grade Cable and Pipe Locator | FCC Compliant (includes 200kHz frequency)

Locate and map buried utilities in a single operation.

The RD8200SG is Radiodetection’s most advanced, combined mapping and utility locating solution that enables users to map buried utilities with survey grade accuracy.

SKU: 10/RD8200SG-FCC-PARENT

Price range: $13,888.00 through $14,172.00 ex. GST

Add to Quote

Map while you locate

  • Combine buried utility locating with accurate mapping in a single operation
  • Survey grade accuracy
  • View and build your map on your mobile phone

Flexibility to work with the system that works for your business

  •  Industry standard file formats to use with your mapping software
  • Choose your preferred mobile app and correction service provider
  • Directly export the data from the locator

Already a mapping expert?

Integrate utility locating into your mapping procedures.

  • Walk the line once
  • Simultaneously map and locate utilities, without compromising on quality
  • Locate as accurately as possible, map as accurately as possible

Already a Locating Expert?

Integrate mapping into your utility locate procedures.

  • Build a comprehensive inventory of large, buried infrastructure networks
  • Minimal additional training for utility operators
  • No separate resources required for utility mapping

 

PERFORMANCE

Sensitivity 6E-15 Tesla
5µA at 1 meter (33kHz)
Dynamic range 140dB rms/√Hz
Selectivity 120dB/Hz
Depth measurement precision1 ± 3%
Locate accuracy ± 5% of depth
Active Locate filter bandwidth ± 3Hz, 0 < 1kHz
± 10Hz, ≥ 1kHz
Start-up time Less than two and a half seconds
Maximum depth readout2 Cable / Pipe: 30m
Sonde: 19.5m

GNSS

Convergence time RTK < 10 sec
Position accuracy RTK 0.01m + 1ppm CEP

Locate Functions

Active Locate Modes Five:
Peak, Peak+™ (choice of combined Peak & Guidance or Peak & Null), Guidance, Broad Peak™, Null
Gain control Guidance Mode: Automatic
Other modes: Manual gain using “+” or “-“ with one touch to return to center (50% of Full Scale)
Custom locate frequencies Up to 5 additional frequencies in the range 50Hz to 1kHz at 1Hz resolution
Active locate frequencies 21 Frequencies:
ELF (98/128Hz), 512Hz, 570Hz, 577Hz, 640Hz, 760Hz, 870Hz, 920Hz, 940Hz, 1090Hz, 1450Hz,
4096Hz, 8kHz, 8440Hz, 9820Hz, 33kHz, 65kHz, 82kHz, 83kHz, 131kHz and 200kHz
Sonde Frequencies 4 Frequencies:
512Hz, 640Hz, 8kHz and 33kHz

Physical Characteristics

Weight With Lithium-Ion battery pack fitted: 2.4kg
Ingress Protection Rating IP65
Protected against dust ingress and jets of water3 applied from any direction
Operating temperature4 -20°C to 50°C
Unit dimensions 687mm x 350mm x 137mm

All specifications are measured in test conditions, at 21°C, and fitted with 2 × good quality alkaline batteries unless otherwise noted.
1 Based on volumetric testing at a known fixed depth. True depth accuracy depends on factors such as ground composition, utility characteristics and the locate frequency / signal strength employed. Always follow local safe digging guidelines.
2 The RD7200 will locate to greater depths in the right conditions, but depth accuracy will be compromised. Depth measurement will not be displayed beyond these depths.
3 Water projected by a nozzle at a pressure of 30kPa /0.3 bar / 4.4 psi in accordance with BS EN 60529 1992 A2 2013.
4 At very low temperatures, battery life will be degraded and measurement precision may be reduced.

Construction

Accurate and simple to use, the RD8200SG comes with twenty one active and four passive frequencies (Power, Radio, CPS and CATV) that cover the majority of site locating tasks. A rugged, IP65 rated casing along with a high contrast screen make it suitable for use in all weather conditions.

Power

Current Direction, track the right line
Identify your target amongst a number of parallel utilities by applying a specialized CD signal from a Tx-10 transmitter. CD arrows displayed on the locator confirm you are tracing your target line.

Power Filters™, works where other locators won’t
When a transmitter can’t be connected, tracing individual power lines through dense networks can be a real challenge. Conflicting or powerful signals confuse or combine to create a wash of signal.

A single key press enables the use of the harmonic properties of power signals to establish if a signal comes from one source, or from multiple cables which you can then trace and mark.

Dynamic Overload Protection, rejects unwanted interference
Automatically filters out interference, enabling use in electrically noisy environments such as near substations or overhead power lines.

Water and Pipeline

A wide choice of active frequencies allow conductive pipes to be traced for long distances. Where sondes or cameras are used to survey pipes made from a variety of materials, including cast iron, clay, fibre, concrete and brick, the four RD8200G sonde frequencies are ideal for quickly locating and tracing their position.

Pipes with Cathodic Protection System can be followed using the CPS passive mode. CPS compass mode ensures alignment with the target pipeline.

Telecom

Program up to 5 extra frequencies to customize the RD8200SG to signals found on your network. The RD8200SG features higher frequencies to locate high impedance lines and sonde frequencies for duct and conduit tracing. Higher frequencies can also be used to trace sheathed domestic cables without grounding connections.

Cable sheath faults can be located to within 10 cm using 8 kHz Fault Find mode with a Radiodetection A-Frame

RELATED PRODUCTS