SAK Large Capacity Powder Sampler

November 01, 2019




The Isolok process samplers can be used to sample almost any powder or granule stream by either a composite, batch or grab sample.  The design prevents exposure of the operators to any hazardous process media as collection is always isolated from process and can’t be left open.

Standard construction is 316 stainless steel, with a variety of exotic alloys and elastomeric seals available to suit almost any process stream.

Out of stock


  • Sample dry and flowable products (powders, pellets, grains, etc.)
  • Captures up to 100cc per cycle
  • Handles particles up to 19mm
  • Rugged 316 stainless construction
  • Flush or extended nose design for packed or free flowing materials
  • Batch or composite samples
  • EDPM, polyurethane or other job-matched seals
  • Models for drop chutes or bins


For composite sampling , using an 100cc sampler , 100cc will be withdrawn each time the sampler is cycled , up to a maximum of 30 times per minute. At the maximum cycle rate the collected sample will be 3000cc per minute. The rate is fully adjustable from this rate to as slowly as desired. As an example , if the sampler were cycled once every 10 minutes the collected sample over eight hours would amount to 4800cc’s , giving 48 individual sample portions to make up the composite.


SAK Powder Sampler